Automatic Submersible Clean Water Pump
Product Code: BPS-100V
When you need to remove water, you need the right pump for the job, and the best pump for general home use is the BPS-100V Automatic Submersible Water Pump.
This Sparkle Pump will automatically start when the water level rises to about 110mm and will pump until the level falls to around 100 mm and can operate at 70L/Min, providing up to 6.5m lift, which should be more than enough for household applications. The pump can be used for the removal of either clean or rain water.
The BPS-100V is made of top quality components that include a resilient fibre glass thermos plastic case and simply plugs into a normal switched power point is operated automatically via the integrate float switch.
The removal of water is usually needs to be done as quickly as possible. This means that you really need to have a pump such as this readily available and in top working condition whenever needed.
Many homeowners realise the need for a good source of water delivery, but often dont realise that there can be times when water must be removed as well, and there are many occasions when this need can arise such as;
- Rainy season and areas become flooded
- You have a seepage problem in your garage or under the house
- You need to drain your swimming pool or hot tub, or large fountain or pond
The convenience of being able to use the Sparkle Pumps BPS-100V Automatic Submersible Water Pump means that you don't have the hassles that come with a non-portable water pump.
When you look at the requirements needed for water removal which is pressure, flow and being able to take it down to a minimal level then you can quickly see that this Sparkle Pump has all that it takes to do this in a quick, and hassle-free manner.
Specifications:
Output: 1/6Hp, 100W
Outlet: 25mm, 1"
Rated: Head 4m, 41 L/min
Max Flow: 70 L/Min
Max Head (Pressure): 6.5m (64 Kpa)
Size: 155 x 140 x 240 mm
Ideal For: Clean/Rainwater
Drains Down To: 100 mm
